Graef CM8002 Manual De Instrucciones página 27

PUSH
Turn the grinding ring to the
●
right as far as possible.
Clean the lower and upper grinding mechanism with the brush enclosed.
●
PUSH
After cleaning, first of all
●
place the grinding ring
back on to the motor block
(arrow pointing to arrow).
IMPORTANT!
In order to test whether the grinding mechanism has been set in correctly, turn the grinding ring
to "coarse", such as level 35, and try to pull out the grinding mechanism by the metal ring. If
the grinding mechanism cannot be removed, it has been installed correctly.
Place the coffee bean container on the unit.
●
FINE ADJUSTMENT OF THE UPPER GRINDING MECHANISM
By means of the fine adjustment of the upper grinding mechanism, you can set the grinding
degree to coarser or finer.
Proceed as follows:
Remove the upper grinding mechanism.
●
PUSH
Press the "PUSH" button,
●
and continue to the grin-
ding ring to the right.
Now place the upper
●
grinding mechanism.
PUSH
When the two arrows
●
point at each other
exactly, you can remove
the grinding ring together
with the upper grinding
mechanism. Remove the
upper grinding mecha-
nism from the grinding
ring.
PUSH
Turn the grinding ring
●
clockwise to the reques-
ted grinding degree
DE
EN
FR
NL
IT
ES
DK
SE
NO
PL
UKR
HU
27