Publicidad
Idiomas disponibles
Idiomas disponibles
ASSEMBLY INSTRUCTIONS
17. Aligning the Upper Back Panel
• Align the Upper Back Panel (O) with the upper
assembly attaching Screws (KK) to the corners
first.
Hardware Used
Ø3x12mm
KK
Screw
18. Securing the Upper Back Panel
• Attach the Upper Back Panel (O) to the upper
assembly by securing all Screws (KK) with a Phil-
lips screwdriver as shown.
Hardware Used
Ø3x12mm
KK
Screw
19. Constructing the Fireplace Front
• Attach Left Side Panel (Q) to Left Lower Front
Panel (P), inserting the pre-installed hardware on
the edges of Left Side Panel (Q) into the
pre-drilled holes on Left Lower Front Panel (P).
• Repeat these steps to attach the Right Side Panel
(S) to Right Lower Front Panel (R).
28WM373 REV2.0
x 2
x 14
15
17
18
19
Q
P
O
S
R
Publicidad
