Haier AS25S2SF1FA-WH Manual De Operación página 10

Operation
Comfortable SLEEP
Before going to bed, you can simply
press the SLEEP button and unit will
operate in SLEEP mode and bring you a
sound sleep.
Operation Mode
1. In COOL, DRY mode
QUIET
1 hour after SLEEP mode starts, temp.
HEALTH will become 1 ºC higher than temp. set-
MODE I FEEL
AIRFLOW
ting. After another 1 hour, temp. will rise
SLEEP
HEALTH TURBO
by 1 ºC further. The unit will run for fur-
ther 6 hours and then stop. Temp. will be
higher than temp. setting so that room
temperature won't be too low for your
sleep.
SELF
EXTRA
CLEAN
FUNCTION
ECOSENSOR
CONFIRM
TIME TIME
ON OFF
CANCEL
LOCK LIGHT RESET
SLEEP
operation starts
1 hr
Rises 1
1 hr
Temp. setting
In COOL, DRY mode
2. In HEAT mode
1 hour after SLEEP mode starts, temp. will become 2 ºC lower than
temp. setting. After another 1 hour, temp. will decrease by 2 ºC fur-
ther. After more another 3 hours, temp. will rise by 1 ºC further. The
unit will run for further 3 hours and then stop. Temp. is lower than
temp. setting so that room temperature won't be too high for your
sleep.
5
Press SLEEP button
SLEEP
SLEEP
operation stops
Approx. 6hrs
Rises 1 C
º
C
º
Unit stop
Temp. setting
1 hr Decreases 2
1 hr
3 hrs
SLEEP
operation starts
In HEAT mode
3. In AUTO mode
The unit operates in corresponding SLEEP mode, which adapted
to the automatically selected operation mode.
4.In FAN mode
It has no SLEEP function.
5.When quiet sleeping function is set to 8 hours, the quit sleeping
time can not be adjusted. When TIMER function is set, the quiet
sleeping function can't be set up. After the sleeping function is set
up, if user resets TIMER ON function, the sleeping function will be
cancelled,the unit will be in the state of timing-on, if user resets
TIMER OFF function, either of their operation time is ended first,
the unit will stop automatically, and the other mode will be can-
celled.
Note to the power failure resume:
Press the SLEEP button ten times in five seconds and enter func-
tion after hearing four sounds.And press the sleep button ten
times within five seconds and leave this function after hearing two
sounds.
Power Failure Resume Function
If the unit is started for the first time, the compressor will not start
running unless 3 minutes have elapsed. When the power resumes
after power failure, the unit will run automatically, and 3 minutes
later the compressor starts running.
Unit stop
C
º
Decreases 2 C
º
3 hrs
Rises 1 C
º
SLEEP
operation stops