Haier AS25S2SF1FA-WH Manual De Operación página 15

Operation
Steri Clean Operation
When the 56ºC Steri-clean function is required,
please access in the hOn APP.
Introduction to Steri Clean
Stage 1 - Self Clean: to remove dirt away. This function freezes
the evaporator with moisture in the air, and removes dirt during the
melting process.The hydrophilic aluminium coating with smaller
angel (ɑ≈5°)helps increase water drainage efficiency.
Stage 2 - 56ºC high temperature sterilisation: It utilizes smart tem-
perature monitoring and frequency control technology to adjust the
compressor operation, so that we maintain the evaporator temper-
ature at high temperature for over 30mins to kill any bacteria and
virus inside the air conditioner.
Stage 3 - Rapid evaporator cooling to enhance the sterilisation
performance. The foil surface is coated with silver nano-particles
which has an anti-bacterial efficiency up to 99%.
Attention:
1. The function lasts 60-80 minutes.
2. Hot air may come out during the process when evaporator is
heated to 56ºC or maintains at 56ºC in summer.
3. This function may cause changes in room air temperature in win-
ter.
4. When outdoor ambient temperature is above 36ºC, the function
cannot be performed. Instead, Self Clean function will be turned
on and lasts 21mins when Steri Clean is turned on.
Loading of the battery
1
Remove the battery cover;
2
Load the batteries as illustrated. 2 R-03 batter-
ies, resetting key (cylinder); Be sure that the
loading is in line with the "+"/"-";
3
Load the battery, then put on the cover again.
10