Haier AS25S2SF1FA-WH Manual De Operación página 13

Operation
ECO SENSOR Operation
ECOSENSOR
For each press,changes as follows:
The intelligent sensor can automatically
detect your position. Depending on your
QUIET
choice, the unit can adjust the airflow in
2 different settings: "Follow me Mode"
HEALTH
MODE I FEEL
AIRFLOW
setting guarantees that the air flow fol-
HEALTH SLEEP TURBO
lows you, while "Avoid Mode" setting
will keep the air flow away from you.
The Eco Sensor can automatically iden-
tify the existance of the human being
to improve the user experience. The
SELF EXTRA air conditioner will switch to ECO mode
CLEAN FUNCTION
ECOSENSOR
after 20 minutes while nobody is in the
TIME TIME CONFIRM
ON OFF
CANCEL
room.
LOCK LIGHT RESET
NOTE:
A human sensor is used to detect changes in the infrared radi-
ation emitted by human bodies. In case of the following condi-
tions, the detection may not be accurate:
1. High room temperature, where the ambient temperature is
close to body temperature.
2. People wear a lot or lie on their stomach or back.
3. The speed of human movement exceeds the sensitivity of
the sensor.
4. Frequent movements of pets, frequent swing of curtains or
other indoor objects due to the wind.
5. Moving targets go beyond the detection range of the sensor.
6. The left and right ends of the indoor unit are installed too
close to the wall.
7. There is direct sunlight inside the room.
8. The air conditioner operates in a room where ambient tem-
perature fluctuates sharply.
Besides, if a person is at the border of two air blowing areas,
the following air will be sent to these two areas respectively or
be swept automatically. The avoiding air will avoid these two
areas or be swept automatically.
Press ECO SENSOR button
cancel
TIMER Operation
Set Clock correctly before starting Timer
operation. You can let unit start or stop
automatically at the following times:
Before you wake up in the morning,
get back from outside or after you fall
asleep at night.
1.
TIMER
TIMER
mode.
QUIET
QUIET
ON.
Remote controller: "TIMER ON"will
HEALTH
HEALTH
MODE MODE I FEEL I FEEL
AIRFLOW
AIRFLOW
flash.
HEALTH SLEEP SLEEP TURBO
HEALTH TURBO
OFF.
Remote controller: "TIMER OFF"will
flash.
SELF SELF EXTRA EXTRA
CLEAN
CLEAN FUNCTION
ECOSENSOR ECOSENSOR FUNCTION
2.
TIME TIME CONFIRM CONFIRM
TIME TIME
ON
ON OFF OFF CANCEL
CANCEL
LOCK LIGHT RESET
LOCK LIGHT RESET
Every time the button is pressed, time setting increases or
decreases 1 min, if kept pressed, it will increase rapidly. It can be
adjusted within 24 hours.
3.
Confirm timer setting
CONFIRM
CANCEL After adjust the time, press the button and confirm the
time ON or OFF button will not flash any more.
4.
Cancel timer setting
CONFIRM
CANCEL Press the button, the time display eliminated.
NOTE:
After replacing batteries or a power failure happens, time set-
ting should be reset. According to the time setting sequence of
TIME ON or TIME OFF, either Start-Stop or Stop-Start can be
achieved.
Select your desired operation
TIME
Select your desired TIME
ON
TIME
OFF Select your desired TIME
Time setting.
8