Tabla de contenido
Publicidad
To reset and clear the error messages, perform the steps
below in the given order:
f Unplug charging cable from vehicle.
f Unplug charging cable from charging station.
f Keep charging cable unplugged for 10 seconds.
f Plug charging cable back into charging station.
f Plug charging cable back into vehicle.
1)
Fault due to excess temperature:
f Before commencing the charging process ensure that
the charging cable has been stored at a place with an
appropriate ambient temperature.
f Compliance with the technical data on the rating plate is
required.
Operating temperature
The charging cable is equipped with a control
system. The control system has sensors to moni-
tor the operating temperature within the charging
cable and the plug to the charging station. On
reaching the permissible operating temperature,
the charging process automatically continues
at a reduced charging current or the charging
process is stopped. If this is the case, it will take
longer to complete the charging process.
Charging cable operating temperature
Charging current in
amperes [A]
Maximum
Reduced
16
20
13
6
13
16
6
13
6
8
6
At an operating temperature of -40 °C or +85 °C, the
charging process is stopped.
Operating temperature of plug to the charging station
At an operating temperature above +50 °C, the charging
process continues at a reduced charging current of 6 A.
Once the operating temperature is below +45 °C again, the
charging process continues at the maximum charging cur-
rent. At an operating temperature below -40 °C or above
+65 °C, the charging process is stopped.
10
Operating temperature ≥
in degrees Celsius [°C]
+75
+80
+82
+80
+82
+82
+82
2)
Faults with the charging cable.
If these faults are not automatically reset, the
charging cable must be checked and repaired by
a qualified electrician.
f Contact your dealer if you have any questions.
Cleaning
The charging cable can be cleaned with a dry or damp
cloth, depending on application conditions and soiling.
T
WARNING
Contact with live parts – Life-threatening danger due to
electric shock
Touching live components can result in death or severe
injury.
f Unplug charging cable.
f Protect plugs and receptacles from moisture and liquids.
f Do not use cleaning agents.
f Clean the charging cable with a dry cloth or a cloth
moistened with water.
Disposal
The charging cable must not be discarded with household
waste.
f Take electrical and electronic appliances to a recycable
waste collection center.
f If you have questions, contact your dealer or the waste
disposal company.
Publicidad
Tabla de contenido
