Silvercrest SSRM 10 A1 Manual De Instrucciones página 48

SilverCrest SSRM 10 A1
that was used is shown. "PRESET" (22) is displayed
permanently after the first station found has been saved.
 The first 20 stations found are stored directly in the presets 01
to 20 and saved. If all station presets are occupied, the scan is
cancelled and the preset station "01" is played.
 The scan can be cancelled at any time by pressing any button.
Please note that already occupied presets are
overwritten.
Manual station scan
 Switch on the scan radio with the "On/Standby" button (6).
 Press the "MODE" button (3). The "FM" symbol (11) flashes on
the display.
 Press the "-" button (2) or "+" button (4) for approx. 2 seconds
to start the manual station scan downwards or upwards. As
soon as the device finds a station with a strong signal, the scan
stops and the station is played.
 If you want to switch to another station, press the "-" button (2)
or "+" button (4) again for approx. 2 seconds to restart the
manual station scan downwards or upwards. The device
searches for the next station with a strong signal.
 To exit scan mode, press the "MODE" button (3) again. The
"FM" symbol (11) now lights up again permanently.
46 - English