Manual station tuning
As an alternative to the automatic or manual station scan, you
can also tune in stations manually. This enables you to find
stations with weaker signals also. Proceed as follows:
Switch on the scan radio with the "On/Standby" button (6).
Press the "MODE" button (3). The "FM" symbol (11) flashes on
the display.
Briefly press the "-" button (2) or "+" button (4).
You thus move 0.1MHz downwards or upwards in the
frequency band each time you press the "-" button (2) or "+"
button (4) respectively.
Proceed in this manner until you find the desired station.
Press the "MODE" button (3) to return to volume mode. The
"FM" symbol (11) is displayed permanently on the display.
Manually saving stations
You have the option of saving 20 stations or frequencies.
Proceed as follows:
Press the "MODE" button (3). The "FM" symbol (11) flashes on
the display.
Search for a station which you want to save.
Press the "MEM/AL" button (7) for approx. 1 second until
"PRESET" (22) flashes on the display (1).
Use the "-" button (2) or "+" button (4) to select a preset
between 01 and 20.
SilverCrest SSRM 10 A1
English - 47