Silvercrest SSRM 10 A1 Manual De Instrucciones página 51

time you press the "On/Standby" button (6), the number of
minutes to switching off is reduced by 10 minutes.
 The scan radio then switches itself on and, after the previously
selected minutes (for example, 40), it switches itself off
automatically.
 The display (1) indicates "SLEEP" (20) when the SLEEP timer is
activated.
 You can start the station scan or access saved stations even
when the SLEEP timer is activated.
 You can delete the activated SLEEP timer by switching off the
scan radio.
Setting the alarm time (Alarm 1 / Alarm 2)
You can set 2 alarm times. Make sure that the time is set
correctly. You can set the alarm time only when the device is
switched off. Switch off the device with the "On/Standby" button
(6) if it is switched on.
 Briefly press the "MEM/AL" button (7). The display (1)
indicates the "Alarm 1" symbol (12), and when you briefly
press the "MEM/AL" button (7) again, the display (1) indicates
the "Alarm 2" symbol (13).
 Select Alarm 1 or Alarm 2 and briefly press the "MODE"
button (3).
 The hour display flashes and you can then set it by pressing
the "-" button (2) or "+" button (4). Then press the "MODE"
button (3) again. The minute display then flashes and you can
set it by pressing the "-" button (2) or "+" button (4).
SilverCrest SSRM 10 A1
English - 49