GB
MT
• Switch the power tool off imme-
diately if the application tool
becomes blocked. Be prepared
for high torque reactions which
cause kickback. The application
tool becomes blocked when it becomes
jammed in the workpiece or when the
power tool becomes overloaded.
• Always wait until the power
tool has come to a complete
stop before placing it down. The
application tool can jam and cause
you to lose control of the power tool.
• Use suitable detectors to de-
termine if there are hidden sup-
ply lines or contact the local util-
ity company for assistance. Con-
tact with electric cables can cause fire
and electric shock. Damaging gas lines
can lead to explosion. Breaking water
pipes causes property damage.
• Only use accessories recom-
mended by PARKSIDE. Unsuitable
accessories may cause electric shock
or fire.
Residual risks
There will always be residual risks even
if you operate this power tool according
to the instructions. The following hazards
may occur in connection with the type and
design of this power tool:
• Hearing damage if suitable ear protec-
tion is not worn.
• Health injuries resulting from the effect
of vibration on the hands and arms in
the event that the device is used over
a longer period of time or is not used
and maintained properly.
WARNING! Danger due to electro-
magnetic field generated while the ma-
chine is in operation. Under certain cir-
cumstances, this field may negatively af-
fect active or passive medical implants.
32
In order to reduce the danger of serious
or fatal injuries, we recommend that indi-
viduals who wear medical implants should
consult their doctor and the manufacturer
of the implant before operating the ma-
chine.
Preparation
WARNING! Risk of injury due to
unintentional start-up. Only insert the re-
chargeable battery into the device once
the device is fully prepared for use.
Control elements
Familiarise yourself with the operating ele-
ments before using the device for the first
time.
• Speed button (17)
• Switch speed level
1 ≙ lowest speed level
2 ≙ highest speed level
• Display (level) (16)
Display of the set speed level
1 ≙ no-load rotation speed: 0-660
−1
min
/impact rate: 0-3265 min
2 ≙ no-load rotation speed: 0-950
−1
min
/impact rate: 0-4700 min
1 2 ≙ speed/impact rate is set in the
PARKSIDE App (Expert Mode).
• Direction of rotation switch (8)
(Fig. A)
CAUTION! Risk of injury! Set the
direction of rotation switch (8) to the
centre position before carrying out any
work on the tool (e.g. maintenance,
tool change, etc.) and when transport-
ing and storing it. This prevents uninten-
tional operation of the on/off switch
(7).
NOTICE! Only operate the direction
of rotation switch when the tool has
stopped!
−1
−1