Motorola IMPRES 2 Guia Del Usuario página 13

Status
Standby
End of Service Life
1.3
IMPRES 2 Battery Initialization
For a full IMPRES 2 functionality, a new IMPRES 2 battery must be initialized by the charger.
The charger automatically detects the new IMPRES 2 battery, and automatically starts initialization.
1.4
IMPRES 2 Pocket Record
When charging the IMPRES 2 batteries, the IMPRES 2 charger records charging information in the battery
memory.
Charging can resume if you remove the IMPRES 2 battery from the IMPRES 2 charger pocket and within 30
minutes, insert it into the same charger pocket.
1.5
Automatic IMPRES 2 Calibration and
Reconditioning
IMPRES 2 batteries with the Self-Calibration and Recondition icon on the battery label
does not require calibration and recondition. If the battery is not fully charged, the
IMPRES 2 battery starts charging when docked in the charger. The LED indicates
steady Red when charging and steady Green when charging is completed.
1.5.1
IMPRES 2 End of Service Life LED Indication
As batteries are used, normal wear reduces available capacity. IMPRES 2 chargers compare IMPRES 2
battery capacity to the battery Rated Capacity.
When the capacity is at a very low value, the IMPRES 2 battery may be nearing its End of Service.
LED Indicator
Blinking Amber
Alternating red and green
Chapter 1: IMPRES 2 Batteries and Chargers
Description
● Battery is waiting to rapid
charge.
● Battery may be too hot, too
cold, or low voltage.
● Charger may be too hot.
Battery remains usable but may
be nearing the end of its rated
service life.
MN008299A01-AC
13