Temper KOBAN K KSAI-6000 ON Manual De Instrucciones página 63

S-single mode
System mode
P-parallel mode
E-ECO mode
A-self aging mode
Press FUNC to select, press
ON/OFF to confirm and enter
in next page.
001- parallel ID1
In parallel mode, the parallel
ID could be set as 000 to 008
Press FUNC to select, press
ON/OFF to confirm and enter
in next page.
All
Current setting
displayed
page
ON/OFF to confirm and exit,
press
selection. The setting will be
activated after restart UPS.
NOTICE: when rated voltage is 200/208VAC, the output PF is 0.9. If other parameters are needed
to change, please set it via monitoring software.
current setting is
together, press
FUNC to change
High Performance 6-10k UPS
Installation
21