CAUTION – PROPERTY DAMAGE!
To avoid damaging the non-stick coating of the sandwich toaster,
►
remove your cooked foods only with a plastic or wooden spatula
or some other suitable, non-metallic implement.
Do not use abrasive cleansers or sharp objects for cleaning.
►
First use
Oil the non-stick coating of the toasting surfaces 5/6 with a suitable
■
cooking oil.
■
Insert the plug into a mains power socket.
Close the appliance and lock it with the lid catch 3. This must click audibly
■
into the lower handle.
■
Let the appliance heat up for about 10 minutes.
NOTE
►
During fi rst usage, a slight smell can arise (minimal smoke development is
also possible). This is normal and dissipates after a short time. Ensure
suffi cient ventilation. For example, by opening a window.
■
Disconnect the plug and allow the appliance to cool down.
■
Clean the appliance as described in the chapter "Cleaning".
The appliance is now ready for use.
Operation
Toasting sandwiches
1) Close the lid and lock it with the lid catch 3. This must click audibly into the
lower handle.
2) Insert the plug into a mains power socket. The red "Power" control lamp 4
lights up.
3) As soon as the appliance has heated up, the green "Ready" control lamp 2
lights up.
4) Open the lid and place two prepared sandwiches on the lower toasting
surface 6.
SSWM 750 B2
GB
MT
49