Publicidad
Idiomas disponibles
Idiomas disponibles
Installation
How to Installthe Unit
1. To prevent vibration
and noise, make sure
the unit is installed securely and firmly
.
3.
Install the unit where the sunlight
does not
shine directly
on the unit.
The outside of the cabinet must extend
Cooledair
outward for at least 12" and there should
K_
be no obstacles,
such as a fence or wall,
within 20" from the back of the cabinet
_--
because
it will prevent heat radiation
of the
condenser.
=
Restriction
of outside air will greatly reduce
the cooling
efficiency
of the air conditioner.
1_1'-#
_gHeat
radiation
1/2"
Over 20"
\\\\\_\\\\\_\\\\\\\\\\\\
CAUTION:
All side louvers of the cabinet must remain exposed to the outside of the
structure.
4. Install the unit a little slanted so the back is slightly lower than the front(about
1/2").
This will force condensed
water to flow to the outside.
5. Install the unit with the bottom about 30"-60"
above the floor level.
W
Window Requirements
NOTE: All supporting parts should be secured to firm wood, masonry, or metal.
This unit is designed
for installation
in
standard
double hung windows
with actual
opening widths from 27" to 39".
The top and bottom window sash must open
sufficiently
to allow a clear vertical
opening of
16" from the bottom of the upper sash to the
window stool.
17
_
I
_-
27" to 39"_
16" rain
(W'_ frame c urtain)S_I
Offset
_lJ
1
-:::_
'/2" to 1V,"
I
_
_
Sill
in_e3isO_Wmali
_-
-'
_Exterior
' (Without frame cu_Jnl [ - ""
Publicidad
