HOMCOM 824-008 Manual Del Usuario página 7

Indicator light:
1. Timer indicator
2. Speed: low-medium-high
3. Mode: Natural/Normal/Sleeping
4. Oscillation
5. Mist indicator
6. Power on indicator
Remote control is supplied with battery inside ; remove the transparent sheet from the
battery cover before use remote control.
When the battery is over, it must be replaced with the same type following the drawing on
the back of remote control.
ON/OFF Button (A):
• Press On/Off button one time to activate the fan. The indicator light (6) will on on the
control panel. You can now press MIST (F) button to select the misting function without
fan operation (mist only).
• Press On/Off button a second time to turn on the fan: the unit will operate at low speed
and the related indicator light (2) will be on on the control panel. You can now select
other functions (speed, mode, timer, mist).
• Press On/Off button when the unit is on to turn off it.
SPEED Button (B):
• To start the fan at low speed, press On/Off button (A) once (when unit is Off): the unit will
operate at low speed and the related indicator light
(2) will be on on the control panel.
• Press speed button one time to select the medium speed: the related indicator light (2)
will be on on the control panel.
• Press speed button another time to select the high speed: the related indicator light (2)
will be on on the control panel.
Cyclic function.
MODE Button (C):
• When you press the On/Off button once, the fan will operate in Normal mode.
• Press mode button one time to change to Natural mode: the unit simulates a natural
breeze mode and the related indicator light (3) will be on on the control panel.
• Press mode button another time to change to Sleeping mode: the unit simulates a soft
breeze suitable for night time use. The related indicator light (3) will illuminate on the
control panel.
• Press again mode button to change to Normal mode
Cyclic function.
TIMER Button (D):
• When the unit is operating, you can set the timer to switch the fan off automatically after
the set time. Press the timer button repeatedly to select the desired time period in half
hours increments: 0,5h, 1h, 1,5h ....7,5h. The related indicator light (1) will illuminate on
the control panel. When all the light (5) are off means that time is not set and the unit will
continuously work until you switch off manually the unit.
OSCILLATION Button (E):
• Press the oscillation button to activate the automatic oscillation from right to left. The
related indicator light (4) will illuminate in the control panel.
• Press again the oscillation button to deactivate the automatic oscillation; the indicator
light (4) will off on the control panel.
MIST Button (F):
Buttons:
A. On/Off
B. Speed
C. Mode
D. Timer
E. Oscillation
F. Mist
7