Publicidad
Idiomas disponibles
Idiomas disponibles
Preparation
WARNING! Risk of injury due to
unintentional start-up. Only insert the re-
chargeable battery into the device once
the device is fully prepared for use.
Wall bracket
You can hang the motor part on the wall
with the keyhole (23) on the bottom of the
device.
Tools and aids required
• Screw (screw head: ⌀ 8-10 mm)
• Corresponding screwdriver
• Dowels, if necessary
Attaching the wall bracket
WARNING! Personal injury or dam-
age to property during drilling. Use suit-
able detectors to determine if
there are hidden supply lines or
contact the local utility company
for assistance. Contact with electric
cables can cause fire and electric shock.
Damaging gas lines can lead to explo-
sion. Breaking water pipes causes prop-
erty damage.
• Using dowels, place one screw at the
desired position on a wall.
• Let the screw head protrude with ca.
10 mm mm distance to the wall.
• Make sure that the suspension system is
designed for the weight of the device.
• (Fig. D) You can place the device with
the keyhole (23) against the screw and
pull the device down as far as it will
go.
Control elements
Familiarise yourself with the operating ele-
ments before using the device for the first
time.
• Charge level indicator button
on the device (18)
• Displaying the charge level of the
battery
• After inserting smart batteries: see
Connecting the device to the Park-
side app, p. 39
• "Connected" indicator (16)
Status of the connection with the
PARKSIDE app
flashing connection attempt
continuous light connection estab-
lished
• Speed/Stroke rate button (19)
• Toggles the stroke rate level
1 ≙ 1000 min
2 ≙ 1500 min
3 ≙ 1800 min
• Display (level) (20)
Displays the set stroke rate level
1 ≙ 1000 min
-1
2 ≙ 1500 min
-1
3 ≙ 1800 min
-1
1 2 3 ≙ rotational speed/stroke rate
is set in the PARKSIDE app (Expert
Mode).
• On/Off switch (7)
• Switching on: Press and hold togeth-
er with the safety switch (21).
• Switching off: Release the on/off
switch (7) or the safety switch (21).
• Safety switch (21)
Ensures two-handed operation.
Attaching/removing the
clippings collector
With the clippings collector in place, re-
move the clippings from the hedge at hori-
zontal cuts towards the user. This makes it
easier to collect the clippings.
GB
MT
-1
-1
-1
35
Publicidad
