TOPDON ArtiDiag Serie Manual Del Usuario página 11

5. Configure the Wi-Fi connection. Select a Wi-Fi from the scanned
list and enter the password.
Note: It is recommended to update the software for better service if
a new version is available on the System Update module.
3.2 Connect the ArtiDiag500/ArtiDiag600 to the Vehicle's DLC
Use the supplied OBD-II diagnostic cable to connect the
ArtiDiag500/ArtiDiag600 to the vehicle's DLC (see Figure 3-6). The
vehicle's DLC port is usually located under the dashboard. After the
vehicle's DLC is properly connected to the ArtiDiag500/ArtiDiag600,
the icon
If you encounter a problem in locating the DLC, please go to Library
> DLC Location for more details, or refer to the vehicle's service
manual.
8
Figure 3-5
changes to .