TOPDON ArtiDiag Serie Manual Del Usuario página 25

2. Select the type of problem.
3. Write a description of the problem.
4. Tap Submit to send the feedback.
Note:
The Diagnostic Feedback function is only available with the
Diagnostics module.
4.4 I/M Readiness
This function checks whether or not the various emission-related
systems on the vehicle are operating properly, and are ready for I/M
testing.
It can also check the monitor running status and to confirm if the
repair of a car fault has been performed correctly.
Note:
The vehicle should only be considered ready for inspection and
allowed to pass emissions if all required tests have been passed.
22
Figure 4-10