Balluff BMD 1L-K Serie Manual De Instrucciones página 162

7 Set up with the display and adjustment module
Diagnosis - Proof test
Additional settings - Date/
Time
Additional settings -
Reset
With the function "Proof test", the function of the instrument can be
checked on a recurring basis.
During the function test, the safety function must be treated as unsafe.
devices.
Manual (SIL).
In this menu item, the internal clock of the sensor is set.
After a reset, certain parameter adjustments made by the user are
reset.
Note:
After this menu window, the reset process is carried out. No further
safety inquiry follows.
The following reset functions are available:
Delivery status: Restores the parameter settings at the time of ship-
signal suppression or user-programmed linearisation curve, as well
as the measured value memory, are deleted.
Basic settings: Resetting of the parameter settings incl. special
parameters to the default values (presettings) of the respective instru-
ment. Any created false signal suppression or user-programmable lin-
earization curve as well as the measured value memory are deleted.