Weber 56576 Guia Del Propietario página 19

sear station burner manual iGnition
®
m danGer
failure to open the lid while igniting the barbecue's burners,
or not waiting five minutes to allow the gas to clear if the
barbecue does not light, may result in an explosive flare-up
which can cause serious bodily injury or death.
The Sear Station ® burner has an on or off control setting . To ignite the Sear Station
burner you must first ignite the two adjacent main burners .
adjacent main burner snap ignition
Note: Each main burner control knob snap igniter creates a spark from the igniter
electrode to the burner lighting tube. You generate the energy for the spark by pushing
in the control knob and turning to START/HI. This will ignite each individual burner.
A) Open the lid (1) .
B) Verify each adjacent Sear Station
flame (2) .
C) Put match in the match holder and strike match .
m warninG: do not lean over open barbecue.
D) Insert match holder and lit match down through cooking grates and Flavorizer
burner (3) .
to ignite the Sear Station ®
control knob in and turn to the ON position (4) .
E) Push the Sear Station ®
m warninG: if the burner does not light, turn the burner
control knob to off and wait five minutes to let the gas
clear before you try again.
note: see "maintenanCe" for burner removal and cleaning
procedure.
◆
to eXtinGuish
Push in and turn each burner control knob clockwise to OFF position . Turn gas supply off
at the source .
◆
usinG the sear station
Your Weber gas barbecue includes a sear burner for searing meats such as steak,
®
poultry parts, fish, and chops) .
Searing is a direct grilling technique which browns the surface of the food at a high
temperature . By searing or browning both sides of the meat you will create a more
desirable flavor by caramelizing the food surface . Searing will also enhance appearance
of the meat with sear marks from the cooking grates . This along with the contrast of
textures and flavors can make food more interesting to the palate .
The Sear Station ® burner has an on or off control setting that works with the two
adjacent main burners . With the sear and adjacent burners you can effectively sear
meats while using other cooking areas for grilling with moderate heat .
Before searing you should turn all of the main burners on HI for 15 minutes to preheat
the grill . Note: Always grill with the lid closed to allow for maximum heat and to avoid
flare ups .
Once the grill is preheated, turn the outer burners off or down to low . Leave the center
two burners on HI and ignite the Sear Station Burner .
Place the meat directly over the Sear Station
1 to 4 minutes, depending on the type of meat and thickness . You may turn the food a
quarter turn to make crossing sear marks (1) before you sear the other side in the same
manner .
Once you are done searing you can finish grilling by moving the meat to a more
moderate heat over the outside burners to achieve the desired doneness .
As you gain experience in using your Sear Station
with different searing times to find results that work best for your taste .
SEAR STATIoN
main burner is lit by visual inspection of a
®
®
. You will Sear each side anywhere from
®
, we encourage you to experiment
®
◆
IGNITIoN & USAGE
®
1
3
®
the grill illustrated may
bars
®
have slight differences
than the model purchased.
Food is placed in the area of intense heat between the lit burners
1
2
4
4 bURNER
SEAR mETHoD
WWW.WEbER.com
® 19