Publicidad
Idiomas disponibles
Idiomas disponibles
OPERATING LIMITS
3 /
Lighting
You can control the lighting in your pool using Poolican's driver LED. This function can only be ac-
cessed via the application.
To do this, connect your LED spotlights (12 Vdc / 60W max.) directly to the power supply terminals
supplied (B).
Remove the 8 screws from the cover (A) and connect the + to the red wire and the - to the black wire
(C) using the connectors supplied.
The lighting control function can only be accessed via the application. You can program it (date, time)
to switch on and off when you want.
Power supply 230 Vac/12 Vdc for LED lighting 60W maximum
B. LED driver location
A. 8 screw location
C. LED DRIVER
4 /
Salt chlorination
As with any pool, it's important to maintain a good chemical balance in the water of your pool, inclu-
ding pH, alkalinity and water hardness.
The only special requirement to use a salt chlorinator is to maintain the proper levels of salt and
stabiliser.
To get the most out of your pool, it is important to maintain these levels in order to avoid corrosion
and scaling. It is therefore recommended that you test all of the basic parameters of the water at
least once per week.
A test strip for these 6 parameters is provided.
In addition, we recommended getting your pool water tested by a professional at least twice per
season.
Your local pool store can provide you with the chemicals and steps you need to take to adjust the
chemical properties of your water.
Don't forget to let them know that you use a salt chlorinator.
8 |
EN
Publicidad
