Publicidad
Idiomas disponibles
Idiomas disponibles
For more details about the kit, refer to Chapter 3.
POOLICAN must be installed between 2 and 3.5 metres from the pool basin:
Please respect the following rules when choosing your installation location:
1.
The location must be easily accessible for optimal operation and ¬maintenance.
2.
The device must be installed on the ground, ideally on a level concrete slab. Ensure that the
ground is sufficiently stable and it can support the weight of the device.
3.
Check that there is enough air flow, that the air exhaust is not directed towards the windows
of neighbouring buildings, and that exhaust air cannot return to the intake. In addition, ensure
that there is enough space around the device to perform servicing and maintenance¬.
4.
The device must not be installed in locations
susceptible of being exposed to oil, flam-
mable gas, corrosive agents, sulphur com-
pounds, or near high frequency devices.
5.
Do not install the device near to roads or
footpaths to avoid mud splattering.
6.
To avoid disturbing neighbours, make sure
to install the device facing away from areas
sensitive to noise.
7.
Keep out of the reach of children insofar as
possible.
8.
The electrical plug must not be exposed to
heavy rain (IPX4 standard).
12 |
EN
INSTALLATION
Between 2 and 3.5 m
Do not place anything within 1.5m of the front of the heat pump.
Leave at least 0.5m of empty space to the sides and rear of the heat
pump.
Do not place any obstacles on top or in front of the device!
Pool
Publicidad
