Hayward AquaRite HC Low Salinity Manual Del Usuario página 15

1. GENERAL
The AquaRite HC LS is a pool treatment system.
®
It sanitizes your pool water effectively using salt water hydrolysis and electrolysis. For the chlorinator to function, it requires
a low concentration of salt (sodium chloride) in the pool water. The AquaRite
converting the salt into free chlorine which kills the bacteria and algae in the pool. The chlorine reverts back to sodium chloride.
This continuous cycle means that there is no need to treat your pool manually.
The AquaRite HC LS is suitable for treating most residential swimming pools.
®
The chlorine quantity required to sanitize a swimming pool correctly varies depending on factors including the number of
bathers, the amount of rainfall, the temperature and cleanliness of the water, and the number of filtration hours.
NOTE: Before installing this product on the filtration system of a pool or spa with an adjacent natural stone terrace or deck,
consult a qualified installer who will advise you on the type, installation, sealant (if any) and maintenance of stone that can be
laid around a saline pool.
2. PACK CONTENTS
Box
Transparent mount for
probe and flow switch,
and four 1/2-inch
stoppers
Drilling
template
AquaRite HC LS
®
Only use spare parts supplied by Hayward brands
HC LS automatically disinfects your pool by
®
NOTICE
AQR
Electrolysis/ Flow switch
hydrolysis cell
User
instructions
Cable gland 4 rawlplugs,
(X2) 4 wall mount screws,
4 eyelet hangers,
4 screws for mounting the hangers
Page 4 on 22
®
3. INSTALLATION
3a. Diagram of overall installation
H-Power
electrical cabinet
Probe holder
for glass and
Goldline probe
p O
H R
P
Pump Filter
AquaRite HC LS
®
Only use spare parts supplied by Hayward brands
AquaRite HC LS
® Wi-Fi
module
Peristaltic
pump
pH probe
Rx probe
Flow switch
Probe-
holder
Earthing Température
anode probe
Heat pump
UV Module
Page 5 on 22
®
Transparent
cell