Candy CI642CBB/1 Manual De Instrucciones página 16

Using the Timer
You can use the timer in two different ways:
You can use it as a minute minder. In this case, the timer will not turn any cooking
zone off when the set time is up.
You can use it as cut-off timer to turn one or more cooking zones off after time is up.
You can set the timer up to 99 minutes.
Using the Timer as a Minute Minder
1. Make sure the cooktop is turned on. And zone selection key is not activated (zone
indication '-' is not blinking).
Note: you can set minute minder before or after cooking zone power setting finished.
2. Touch timer key, "00" will show in the timer display
and "0" will blink.
3. Set the time for between 1 to 99 minutes by touching
the"-" or" +" control of the timer (e.g. 5)
4. Press the "+" once increases the time by one minute, Press the "-" once decrease the
time by one minute. When the set time exceed 99 minutes, it will automatically
return to "00", if the "-" and "+" keys are pressed simultaneously, the indicator will
display "00".
5. When the time is set, it will begin to count down immediately. The display will
show the remaining time.
6. Buzzer will bips for 30 seconds and the timer indicator shows"-- " when the setting
time finished.
Timer Cancellation
After setting the time again, hold down the "Timer" key for 5 seconds, this will cancel
the timer and the indicator will revert to "00".
Using the timer to switch off one or more cooking zones
1. Touching the heating zone selection control that you want
to set the timer for.
16