Installation; Package Contents - OHAUS 3100C Manual De Instrucciones

STARTER 3100C Bench Conductivity Meter
2

INSTALLATION

Carefully unpack the meter.
2.1

Package contents

The ST3100C-B package has the following items
ST3100C-B
STARTER 3100C meter
Stand alone electrode holder
1413 µS/cm standard solution
12.88 mS/cm standard solution
In use cover
In addition to ST3100C-B content, the ST3100C-F package also includes the following:
STCON3 conductivity electrode
The best measurement range for STCON3 4-ring (4-pole) conductivity electrode is 70 μS/cm-200
mS/cm. In this range the measurement accuracy can reach 0.5%.
If you use STCON3 to measure pure water in which conductivity value is below 70 μS/cm; the
measurement will be less accurate (approximately 1% to 5%).
Does not use STCON3 to measure cond. value less than 2 μS/cm, the accuracy is not good.
Accessories:
Model Description
4-ring cond. electrode
(70 μS/cm-200mS/cm, 0.5% accuracy; )
( 2-70 μS/cm, 1-5% accuracy)
STCON3
Pure water cond. electrode
(0.02μS/cm-200 μS /cm; 0.02 μS/cm accuracy)
STCON7
Standard Conduct 10 μS/cm 250ml
Standard Conduct 84 μS/cm 250ml
Standard Conduct 1413 μS/cm 250ml
Standard Conduct12.88mS/cm 250ml
Electrode holder stand alone (3100/3100C)
In use cover
Units
1
1
1 bottle (about 20ml)
1 bottle (about 20ml)
1
1
P/N
83033972
30080693
30100441
30100442
30100443
30100444
30058733
30058734
EN-5