Safety Precautions - OHAUS 3100C Manual De Instrucciones

EN-2
1.2

Safety Precautions

CAUTION: Read all safety warnings before installing, making connections, or servicing this
equipment. Failure to comply with these warnings could result in personal injury and/or property
damage. Retain all instructions for future reference.

Verify that the input voltage range printed on the data label and the plug type matches the
local AC power to be used.

Make sure that the power cord does not pose a potential obstacle or tripping hazard.

Use the equipment only in dry locations.

Dry off any liquid spills immediately. The instrument is not watertight.

When using chemicals and solvents, comply with the instructions of the chemical producer
and the general lab safety rules.

Use only approved accessories and peripherals.

Operate the equipment only under ambient conditions specified in these instructions.

Disconnect the equipment from the power supply when cleaning.

Do not operate the equipment in hazardous or unstable environments.

Service should only be performed by authorized personnel.
STARTER 3100C Bench Conductivity Meter