Publicidad
Idiomas disponibles
Idiomas disponibles
ENGLISH
3. Programme start
-
Press the START/PAUSE button. The corresponding indicator light will illuminate, the door
will lock, and the DOOR LOCK indicator light will illuminate.
To avoid water spillage, do not open the detergent dispenser during a running
-
programme.
-
The remaining duration of the programme may vary. Factors such as imbalance in the
wash load or foam formation may affect the programme duration.
4. Change the configuration of a running programme, if necessary.
You can change the settings while a programme is running. The changes shall be
implemented as long as the respective programme phase has not been completed yet.
To change the configuration of a running programme:
Press the START/PAUSE button to pause the running programme.
-
-
Change your settings.
Press the START/PAUSE button again to continue the programme.
-
If you have changed the programme, do not add detergent for the new programme.
To prevent a running program from being accidentally changed (e.g., by children), use the
Child Lock function.
Pausing a running programme and opening the door
Press the START/PAUSE button to pause the running programme.
If the water level and/or temperature in the drum is/are not high, the DOOR LOCK indicator
light will go out. You can open the door, for example, to add more laundry or to remove
laundry that was loaded by mistake. Press the START/PAUSE button again to continue the
programme.
1. Change the configuration of a running programme, if necessary.
2. Cancellation of a running programme
-
Turn the wash cycle selector to turn off the machine while the light under the "
symbol is on.
If the water level and/or temperature is low enough, the door will unlock and can be
-
opened.
-
The door will remain locked if there is a higher water level in the drum. To unlock the door,
first turn the wash cycle selector to select the SPIN programme, then turn off the SPIN
option by pressing the SPEED button to set the spin speed to "-" (should be displayed on
the digital display).
Press the START/PAUSE button to run the SPIN programme. Water will drain from the
-
drum during the wash cycle. The door unlocks at the end of the programme.
BOLERO WASH&DRY 8580 INVERTER B/STEEL B
120
02770/71_BOLERO WASH&DRY 8580 INVERTER B/ INVERTER STEEL B_RP_01230629.indd 120
02770/71_BOLERO WASH&DRY 8580 INVERTER B/ INVERTER STEEL B_RP_01230629.indd 120
"
29/6/23 16:38
29/6/23 16:38
Publicidad
