HomeMatic IP HmIP-SK9-2 Manual De Instalacion Y Uso página 33

Configuration menu of the radiator-thermostat
When using the spacer (J), fasten
the smaller adhesive strip at the
back side of the spacer (see figure
7) and attach it to the desired
position on the wall. Afterwards,
place the magnet contact on to
the spacer.
Attach the small double-sided adhesi-
ve strip to the back side of the magnet
contact (I) (see figure 11) and press the
magnet contact onto the desired posi-
tion of the window.
6.4.3 Screw mounting
Do not yet assemble the magnet
contact before screw mounting.
For screw mounting, please proceed as
follows:
• Pre-drill the screw holes in the bra-
ckets (H) using an appropriate drill.
• Mark the screw holes for the elec-
tronic unit (K) according to the
bracket on the window.
• Mark the screw holes for the ma-
gnet contact (I) or, if required, for
the spacer (J) on the window.
• If you are working with hard sur-
faces you should pre-drill the holes
marked using a 1.5 mm drill.
• Place the bracket of the electronic
unit to the desired mounting loca-
tion and turn both screws (2.2 x 16
mm) into the screw holes.
Figure 12
• Insert the electronic unit into the
bracket.
• Place the back side of the magnet
contact or the spacer to the desi-
red mounting location and turn
both screws (2.2 x 13 mm) into the
screw holes (see figure 12).
• Place the magnet in the bracket
and insert the back side into the
housing of the magnetic contact.
When using the spacer, you can
simply attach the magnet contact
after installation to the spacer.
7 Configuration menu of the
radiator-thermostat
When using the radiator thermostat wi-
thout Homematic IP Access Point, you
can select the following modes via the
configuration menu after set-up directly
on the device and adjust the settings to
your personal needs.
• By pressing and holding the menu
button (G) for at least 2 s, you will
be entering the configuration menu.
• Select the desired icon via the plus
and minus buttons (E and F) by
pressing the menu button briefly to
change the settings of the different
33