Tuner Operation; Frequency Step Setting - Kenwood KDC-MP238 Manual De Instrucciones

Tuner Operation

Function of KDC-MP238CR/KDC-MP138CR

Frequency Step Setting

Changing the tuning frequency step.
The original setting is FM band 50 kHz.
1
Turn the power OFF
Press the [SRC] button for at least 1 second.
2
Switch the frequency step
While pressing the [1] and [5] buttons, press the
[SRC] button.
Release your fingers from the button after the
display appears.
The frequency step changes to FM band 200 kHz.
⁄
• When the same operation is repeated, the frequency
step returns to the original setting.
• When the frequency step is changed, the frequencies in
the memory are deleted.
8
|
KDC-MP238/CR/KDC-MP208/KDC-138/CR