Publicidad
Idiomas disponibles
Idiomas disponibles
How to Use
EN
Switching Modes
Press the mode switch
to switch modes according to your needs.
Auto Mode
The appliance will intelligently adjust the suction power according to the stains on the ground.
Ultra Mode
Preparing ultra mode, please wait for 30 seconds. This mode is suitable for deep cleaning.
Suction Mode
If suction mode is selected, the appliance will vacuum water only; the brush roller will not be dampened,
and no water will be dispensed from the Clean Water Tank.
Emptying the Used Water Tank
1. Press the Used Water Tank release button to
remove the tank.
3. Re-install the Used Water Tank until you hear a click.
10
2. Press the Used Water Tank cover release
buttons to remove the tank cover. Pour out
the used water and use the solid waste filter
basket to separate the solid waste from the
used water.
1
2
3
Note: The solid filter basket is a detachable
component. The appliance can be used normally
after the part is removed.
How to Use
Self-Cleaning With Hot Water & Drying Mode
1. Place the appliance back onto the base. Ensure that the water in the Clean Water Tank
is sufficient for self-cleaning.
2. Briefly press the self-cleaning button
cleaning.
3. Please empty the Used Water Tank after self-cleaning is completed and drying mode
has been engaged. Press the button
4. Press and hold the self-cleaning button to enter the drying mode settings and select
the default drying mode.
Note:
• Do not touch the brush roller, hot water, or heating module of the charging base while self-cleaning with hot water.
• The self-cleaning function can be enabled only when the appliance is being charged and the battery level is more
than 15%. If the battery level is lower, please charge to 15% before starting self-cleaning.
on the top of the handle to start/stop self-
to exit drying mode.
EN
11
Publicidad
