Publicidad
Idiomas disponibles
Idiomas disponibles
Care & Maintenance
EN
Tips:
• Turn off the appliance before maintenance. Do not touch the power switch.
• Replace parts if needed. The parts must be replaced by those available from the manufacturer or its service agent
• If the appliance is not used for an extended period, fully charge it, unplug the power plug, and store the
appliance in a cool, low-humidity environment away from direct sunlight. To avoid over-discharge of the
battery, charge the appliance at least once every 3 months.
Cleaning the Used Water Tank
1. Press the Used Water Tank release
button to remove the tank.
3. Rinse the Used Water Tank, including the
separation motor on the tank cover, solid
waste filter basket and tank cover with
water. Use the provided cleaning brush to
clean the inner walls of the tank.
Note: It is recommended to clean the Used Water Tank in time after each use, as well as before and after the self-
cleaning.
12
2. Press the Used Water Tank cover
release buttons to remove the tank
cover. Remove the filter from the Used
Water Tank cover.
Used Water
Tank Cover
Filter
Release
Button
Separation
Used Water
Motor
Tank Cover
Solid Waste
Filter Basket
4. Re-install the filter and the Used Water
Tank cover. Then re-install the Used Water
Tank until you hear a click.
咔哒
Click
Care & Maintenance
Cleaning the filter
1. Remove the filter and gently knock off
the floating dust on the surface.
Note: Replacing the filter every 3 to 6 months is recommended.
Cleaning the Solid Waste Filter Basket
Remove the Used Water Tank and the tank cover. Then, detach the solid waste filter
basket to clean it. To reassemble, align the bottom of the Used Water Tank cover with
the positioning holes on the solid waste filter basket. Insert it properly until you hear a
click.
Note: The solid filter basket is a detachable component. The appliance can be used normally after the part is
removed.
Cleaning the Tube and the Dirt Sensor
Remove the Used Water Tank. Wipe the tube and the dirt sensor with a wet cloth
before use.
Dirt Sensor
Note: Do not rinse the tube or the dirt sensor.
2. When the filter is dirty and needs
washing, rinse it with water. It must be
completely dry before use.
Click
咔哒
2
1
EN
13
Publicidad
