Publicidad
Idiomas disponibles
Idiomas disponibles
The Bluetooth® connection may be interrupted if the distance between the measuring
tool and the mobile device is too great or is blocked, and if there are any sources of elec-
tromagnetic interference. Should this occur, the Bluetooth® button (2) will flash.
To establish a new connection (first-time connection or connection to another mobile
device):
– Ensure that the Bluetooth® interface is activated on the mobile device and that
Bluetooth® is activated on the measuring tool.
– Load the Bosch Levelling Remote App app. If multiple active measuring tools are
found, select the appropriate measuring tool.
– Press and hold the Bluetooth® button (2) on the measuring tool until the button be-
gins rapidly flashing.
– Confirm the connection on your mobile device.
– The connection is successfully established as soon as the Bluetooth® button (2) lights
up continuously.
– If it is not possible to make a connection, the Bluetooth® button (2) continues to flash
rapidly.
To switch off the Bluetooth® function:
Briefly press the Bluetooth® button (2) so that its light goes out or switch off the measur-
ing tool.
Measuring Tool Software Update
If there is a software update available for the measuring tool, a notification will appear in
the Bosch Levelling Remote App. To install the update, follow the instructions in the
app.
During the update, the Bluetooth® button (2) will flash quickly. All of the other buttons
will be deactivated and the laser lines will be switched off until the update has been suc-
cessfully installed.
Accuracy Check of the Measuring Tool
Influences on Accuracy
The largest influence is exerted by the ambient temperature. In particular, temperature
differences that occur from the ground upwards can refract the laser beam.
In order to minimise thermal influences resulting from heat rising from the floor, it is re-
commended that you use the measuring tool on a tripod. In addition, position the meas-
uring tool in the centre of the work surface, wherever this is possible.
In addition to external influences, device-specific influences (e.g. falls or heavy impacts)
can also lead to deviations. For this reason, check the levelling accuracy each time be-
fore beginning work.
Bosch Power Tools
English | 45
1 609 92A 8JB | (08.12.2023)
Publicidad
