Publicidad
Idiomas disponibles
Idiomas disponibles
20. If the kettle is overfilled, boiling water may be ejected..
21. This appliance should only be used with the stand provided.
22. Avoid spillages on the stand or connector.
23. For details on how to clean this appliance, please see the Care &
Cleaning section in this booklet.
24. Use the appliance according to these instructions. Any misuse may
cause potential injury, electric shock or other hazards.
25. The surface of the heating element is subject to residual heat after use.
26.
Surfaces are liable to get hot during use.
1. All servicing, other than cleaning, should be performed by an authorised service representative. See
Guarantee section.
2. Unplug Kettle from wall outlet. Empty the Kettle and allow it to cool before cleaning.
Exterior
• Use a soft, damp cloth to clean the exterior.
• DO NOT use abrasive cleaners. Dry exterior thoroughly before use.
• DO NOT immerse kettle or Power Base in water or other liquid.
Drip tray
• Remove steel insert and wipe down both parts with a damp cloth.
• DO NOT use scouring pads or abrasive materials. Dry thoroughly.
1. Read all instructions carefully and keep them for future reference.
2. Remove all packaging.
3. Ensure that the filter is installed in the kettle.
4. Plug the Power Base into a 220-240V AC wall outlet.
5. Fill the kettle to the MAX fill line with cold tap water. Bring to a boil and discard. Repeat.
6. The kettle is now ready to use.
1. Open the Lid by pressing the Lid Opening Button and fill with a minimum of 500 ml (2 cups) of water.
2. DO NOT attempt to fill the Kettle while it is plugged into the wall outlet.
DO NOT use for other than boiling water. Other liquids will contaminate the interior of the kettle.
CARE AND CLEANING
BEFORE FIRST USE
HOW TO USE
4
Publicidad
