Vornado ENERGY SMART OZI42DC Guia Del Propietario página 9

GETTING STARTED
BASE ASSEMBLY
Screwdriver required.
1. Assemble the two base halves together, pressing the two halves
together until flush. You should hear a slight click when fully
connected.
2. Feed the power cord through the center hole on the base.
3. Assemble the base to the bottom of the tower. There is an
alignment pin (A) located on the bottom of the tower and an
alignment recess (B) located on the base. An arrow on bottom
of base indicates alignment recess location. To ensure correct
assembly, position base onto bottom of tower with (A) and (B)
aligned.
B
A
4. Attach base to tower using 4 screws provided.
5. Route the powercord through cord path located on bottom of
base.
WARNING - Choking hazard. Keep small parts, like screws, away
from children and pets.
x4
7
English