10
Insert the diamond cutting disc into the dust extraction hood from below. Pay
attention to the direction of rotation of the cutting disc; the arrows on the dust
extraction hood and cutting disc must point in the same direction.
11
Press and hold the locking button.
Fasten the cutting disc by tightening the clamping nut with a flange key for de-
pressed-centre angle grinder wheels. The flat side of the clamping nut must
face the cutting disc.
12
Let go of the locking button, slide the base plate onto the dust extraction hood,
and tighten the wing screw.
13
Fit the suction hose to the connection piece of the dust extraction hood.
14
To process scratch-sensitive materials, place the shoe on the base plate.
14