Mi-T-M Corporation ChoreMaster CM-1400-1MEH Manual Del Operador página 16

CHECK PUMP OIL
1. Remove shipping plug and install vented plug (A) on
pump.
2. Check oil in pump. With washer on level surface, the
oil should be level with the center of the sight glass (B).
If necessary, top with SAE30W non-detergent oil.
CONNECT DISCHARGE HOSE TO GUN
1. Apply pipe tape or sealant to threads on gun.
2. Attach discharge hose to gun using two open-end
wrenches. Tighten hose fitting enough to prevent
leaks.
IMPORTANT: Do not attach nozzle wand to gun handle
until water system is primed.
16
Preparing the Washer
A
B
Operator's Manual