FLAEM Rhino Clear RC1-1 Manual De Instrucciones De Uso página 15

TROUBLESHOOTING
Problems
ca-
If the nasal douche
delivers insufficiently or
re-
for a short time.
.
fe-
rer
di-
If the nasal douche
ith
does not spray
op
ed
ed
If, after checking the conditions described above, the device is still not working properly,
we recommend contacting your trusted dealer or an authorised FLAEM service centre
nearest to you. You can find a list of all Service Centres at http://www.flaemnuova.it/it/info/
re,
assistenza
DISPOSAL
be
The nasal douche is to be disposed of as general waste after a sanitisation cycle.
Packaging
nic
ed
21
PAP
are
fu-
he
Check that the atomiser (3) has been positioned correctly.
Check that the nasal douche is clean and, if it is not, perform cleaning
again by carefully following the instructions for hygienic preparation.
Check that the solution has been correctly added into the spray
chamber (4.1) of the ampoule body (4). Check that the amount of
liquid does not exceed 10 ml.
Check that the nasal douche is clean and, if it is not, perform cleaning
again by carefully following the instructions for hygienic preparation.
The accessories are not
properly connected to
the compressor unit
or flow of air from the
centralised system
The compressor unit
or centralised system
does not deliver any air
or the airflow is insuf-
ficient
Product box
Solutions
Check proper connection of the
accessories with the compressor unit or
centralised system air flow
Check that the compressor unit or
centralised system delivers the airflow and
that the air generates a working pressure
within the range set out in the table
provided in the section TECHNICAL
SPECIFICATIONS below in the manual.
05 Heat-shrink film
PP
15