Installation instructions
Barrier
Barrier
16 English
Install_DOB30x977xx_DG68-01308A-01_EN+MES+CFR.indb 16
Install_DOB30x977xx_DG68-01308A-01_EN+MES+CFR.indb 16
WARNING
When inserting the oven, use caution not to
deform or damage the barrier underneath.
Self-diagnosis
Temp sensor & Heater check
1.
After connecting the power, check if the display works properly.
2.
Remove all accessories (Gliding Rack, Flat-Rack...etc.) from inside of the oven
cavity.
3.
You cannot proceed with self-diagnosis if the oven cavity is hot or the door is
open.
•
In this case, "Hot or door" message appears on the display.
4.
To start self-diagnosis, press both Hidden Keys simultaneously for 5 seconds
and select install test button.
•
Refer to the table below for the hidden keys for each model.
•
Self-diagnosis takes approximately 6-7 minutes.
Model
Control panel
Hidden Key
Model
Control panel
Hidden Key
SETTING + RESERVOIR
DOB30*977D*
UPPER + LOWER
DOB30*977S*
2023-02-22 오후 8:27:02
2023-02-22 오후 8:27:02