Auto Cue Function - Marantz professional CDR633 Guia Del Usuario

Auto cue function

Using the auto cue function, you can select a
cue point where sound begins (not where a
track begins) within a track.
1
As described in "Basic operation in Menu
mode"(→ p.13) ,acess the "AUTO_CUE?"
menu item and press the MULTI JOG dial.
The display will indicate "A_Cue> XXX".
(you can select ON or OFF).
2
Turn the MULTI JOG dial to turn auto cue
function on.
If you turn this on, the [A • CUE] indicator in
the display will light.
3
Press the MENU button or the MULTI JOG
dial to return from menu mode to normal
mode.
4
As described in "Basic operation in Menu
mode"(→ p.13) ,acess the "A_CUE
LEVEL?" menu item and press the MULTI
JOG dial.
(The display will indicate "A_LEV> XXXdB".)
5
Turn the MULTI JOG dial to set the sound
detection level (-24,-30,-36,-42,-48,-54,-60,-66
and -72dB).
6
Press the MENU button or the MULTI JOG
dial to return from menu mode to normal
mode.
7
Then, select a track and press the
button on the front panel.
The unit enters automatically playback ready
mode.
8
When the (play) button is pressed again,
playback begins at exactly the cue point.
4 – Playback—Auto cue function
Auto Ready function
This function allows the playing back a single
track, and the automatic cuing of the next
track ready for playback.
1
As described in "Basic operation in Menu
mode"(→ p.13) ,acess the
"AUTO_READY?" menu item and press
the MULTI JOG dial.
The display will indicate "A_Ready> XXX".
(you can select ON or OFF).
2
Turn the MULTI JOG dial to turn auto ready
function on.
If you turn this on, the [A • READY] indicator
in the display will light.
3
Press the MENU button or the MULTI JOG
dial to return from menu mode to normal
mode.
Note
Combined with Auto cue function, the unit
enters playback ready mode at the point where
the sound detection level is set in A_CUE
LEVEL meun item of next track.
(play)
21