Sirona SIROEndo Pocket Instrucciones De Uso página 62

Operating Instructions SIROEndo Pocket
61 97 722 D 3526
D 3526.201.01.05.02 07.2012
15 Selection of a file from the set file system (
Type
16 Sets the rotational speed of the file (
Rpm

17 Increases or decreases
Torque
18 A - Loads the data from the SIROEndo Pocket memory stick
Load (individual user settings).
B - Changeover between the file library and the personal file assortment.
19 Selection of individual files for a user's personal file assortment.
Mem
20 Saves the data to the SIROEndo Pocket memory stick (individual user set-
Save
tings) or to the internal memory of the unit.
21 Switches the AutoReverse function on or off (automatic reversal of rotation
when torque is reached. Available only if the set torque value is not equal to
A/Rev
the maximum value).
22 Sets the gear or reduction ratio of the contra-angle handpiece used
(6:1 - 16:1 - 18:1 - 20:1 - 24:1).
Reduct.
23 Changes the micromotor's direction of rotation to counterclockwise.
Reverse
24 Menu for setting the signal tone volume, display contrast and language
Set-Up
selection.
25 A - Performs calibration of the contra-angle handpiece. A calibration must be
performed each time you lubricate or change the contra-angle handpiece.
Cal
B - Activates the automatic micromotor stop if the file reached the apex (
the display).
C - The micromotor automatically stops when the apex has been reached.
After the foot pedal is pressed again, the micromotor's direction of rotation
changes to counterclockwise (
26 Switches the micromotor on or off independently of the foot pedal.
Motor
5 Controls and functional elements
 
smaller,
 
higher, lower).

the torque.
**
on the display).
larger).
*
on
15