SPT 400R Traducción De Las Instrucciones De Uso Originales página 44

Transport and set-up
4�2 Set-up
DANGER
Danger of death by electric shock
When working on the pump, comply with le-
gal regulations.
Work on electrical components must be
f
performed by qualified electricians only.
Disconnect the pump and, if necessary,
f
the system from the power source before
working on the electrical components.
4�3 Storage
The pump can be stored vertically or horizon-
tally.
Secure the pump against accidental rolling.
f
Place the pump on a stable surface so that
f
it does not fall over.
If the pump is to be stored for a longer period
of time, choose a clean and dry place (relative
humidity <40 %).
After prolonged storage, check the pump as
follows:
Turn the impeller by hand.
f
Check the seals and cable entries.
f
397
44 /
4�4
230 V
L1
L2 (N)
Ground/PE
400 V
L1
L2
L3
Ground/PE
Operating Instructions for Submersible Pump Series SPT-R
Electrical connection
Ground/PE
Brown
Blue
Yellow/Green
Ground/PE
Brown
Black
Grey
Yellow/Green