Publicidad
Idiomas disponibles
Idiomas disponibles
20. WARNING: For the purposes of recharging the battery,
only use the detachable power supply unit provided with
this appliance.
21. Use only with power supply unit KH6-050100US.
22. The battery must be removed from the appliance before it is
scrapped.
23. The appliance must be disconnected from the supply mains
when removing the battery.
24. The battery is to be disposed of safely.
SAVE THESE INSTRUCTIONS
THIS PRODUCT INTENDED FOR HOUSEHOLD USE
OPERATING INSTRUCTIONS
Before starting trimmer, remove blade guard (some models may not have a blade
guard). Plug cord into electrical outlet, operate at 120 volt, 60 cycle AC electrical
current or as noted on the unit. Then plug adapter cord directly into the bottom of
the trimmer. To start trimmer, move ON/OFF switch button to ON position, to stop,
move switch button back to original position. After using your Andis trimmer, rewrap
cord and store in a safe place.
UNIVERSAL AC/DC POWER ADAPTER
The unit is equipped with a universal AC/DC power adapter.
CHARGING TRIMMER
This battery charger is intended for use with Andis model CLT-3 lithium-ion battery
with a rated capacity of 3.7V
the carton. Plug the adapter into a 120V AC outlet, or according to your local power
standards. Confirm the voltage available at each overseas location before using the
appliance. For connection to a 240-V supply, use an attachment plug adapter of the
proper configuration for the power supply receptacle. Note that the trimmer ON/OFF
switch must be in the OFF position for the battery to charge. Plug the adapter cord
directly into the bottom of the trimmer (Figure A). The red light on the trimmer will
turn on. Once fully charged the light will turn green.
4
2.96 Wh. Remove the trimmer and AC adapter from
Publicidad
