Publicidad
Idiomas disponibles
Idiomas disponibles
The trimmer has not been charged at the factory. Please charge the trimmer for
two hours before the first use for maximum performance. You can keep the trimmer
plugged into the adapter when not in use. The adapter will maintain the battery
at full charge and the green light will stay on. However, we recommend that the
adapter be unplugged if the trimmer won't be used for seven or more days.
FAILURE TO CHARGE
1. Make sure voltage is present at the wall outlet (confirm with an appliance you
know is working).
2. Check to make sure adapter cord is plugged firmly into trimmer. Twist the adapter
connector slightly to insure good electrical connection. If failure to charge
still exists, return trimmer to Andis or an Andis authorized service station for
examination and repair or replacement.
USE WITH ADAPTER CORD
If the trimmer powers OFF in the middle of a trimming job, the power cord can be
attached to continue use in corded operation. When the trimmer is running with the
power cord attached, the green light will remain off, even if the battery is partially or
fully discharged. The trimmer will not charge while in use with the cord attached.
USING ATTACHMENT COMBS
Your trimmer will come with two styles of attachment combs in various sizes (varies
by model). To use single length combs, slide front of attachment comb over the teeth
of the blade. Snap comb down over back of blade (Figures B, B-2, C, & C-2). To use
the adjustable length comb, simply slip the cutter blade teeth into comb and snap
the comb down (Figures D & E). To remove, simply snap off. To adjust, press the circle
on the front of the comb slightly and move the comb up or down to your desired cut
length (Figures F & G). Different blade angles in relation to the skin, thickness and
texture of the hair will vary the cutting length.
BLADES
When trimming is complete, slide ON/OFF switch to OFF position and remove the
attachment comb (if being used). Lightly brush out blades with the blade cleaning
brush provided. For best results, put a drop of Andis Clipper Oil on the blade when
necessary (see Care & Servicing of Your Andis Trimmer Blades). Motor bearings are
permanently lubricated–do not attempt to oil. Blades should be handled carefully
and never bumped or used to cut dirty or abrasive material.
6
Publicidad
