RIDGID R86095 Manual Del Operador página 5

OPERATION
 When the battery pack(s) are fully charged, remove them
from the charger.
CHARGING HOT BATTERY PACK(S)
When using a tool continuously, the battery pack(s) may
become hot. A hot battery pack may be placed directly onto
the charger port but charging will not begin until the battery
temperature cools to within acceptable temperature range.
When a hot battery pack is placed on the charger, the orange
LED FUNCTIONS
See Figure 4, page 7.
MODE LED FUNCTION
Orange Flashing
Temperature
Delay
Evaluate
Error
• Try to repeat the conditions a second time by removing and reinstalling the battery pack. If the LED Error status repeats
a second time, try charging a different battery.
• If a different battery charges normally, dispose of the pack that received the Error (see your battery pack manual for
instructions).
Charging
Charged
NOTE: Maintenance information begins on page 6 after French and Spanish
This product has a 90-Day Satisfaction Guarantee Policy, as well as a
Three-year Limited Warranty. For Warranty and Policy details, please go to
www.powertools.ridgid.com or call (toll free) 1-866-539-1710.
BATTERY PACKS
Hot Battery pack(s)
Cold Battery
Pack(s)
Testing Battery
pack(s)
Orange ON
Error
Red ON
Charging
Green Flashing
Deeply Discharged
Batteries Full
Green ON
language sections. Illustrations start on page 7.
LED will begin flashing and the green LED will be off. When
the battery pack cools, the charger will automatically begin
charging.
CHARGING COLD BATTERY PACK(S)
Cold battery pack(s) may be placed directly onto the charger
port but charging will not begin until the battery temperature
warms to within acceptable temperature range. When a cold
battery pack is placed on the charger, the orange LED will
begin flashing and the green LED will be off. When the battery
pack warms, the charger will automatically begin charging.
When battery pack(s) reach cooled temperature,
charger begins charge mode.
When battery pack(s) reach warmed temperature,
charger begins charge mode.
Charger evaluates battery pack(s), then begins charge
mode.
Battery pack or charger error.
Batteries are being charged.
Charger pre-charges battery pack(s) until normal
voltage is reached, then begins charge mode.
Charging is complete; charger maintains charge mode.
5 — English
ACTION