BH FITNESS G6520TFTR Manual Del Usuario página 13

return to main screen click on the icon
HOME in the upper left corner, Fig.5.
SCREEN BRIGHTNESS
ADJUSTMENT.-
On the main
OPTIONS, then select the option
SCREEN, Fig. 5. Adjust the brightness
by touching directly the bar on the
screen. For return to main screen click
on the icon HOME in the upper left
corner, Fig.5.
VOLUME ADJUSTMENT.-
Click on the icon
the right side of the screen to
adjust the volume.
OPERATING INSTRUCTIONS.-
This monitor
programs: 1 MANUAL program; 36
PRESET PROGRAMS;
program; 1 NAVIGATION
program and
CONTROL program.
Pressing the START/STOP key or
QUICKSTART on the screen will light
the MANUAL and the machine will start
within 3 seconds,
countdown on the TIME display, at a
speed of 1.0km/h.
You can change the speed settings
between 1.0–20 km/h (G6424TFT 1.0-
18 km/h, G6427TFT-G6520TFT 1.0-
22 km/h) at any time during the
exercise by pressing the SPEED (↨)
keys, and the inclination settings by
pressing the INCLINE (↨) keys.
The machine will stop if you press the
START/STOP key or if you remove the
SAFETY KEY and will display a
summary of your exercise. Fig.6
screen click
located on
has the following
1 USER
MODE
1 HEART RATE
shown by
Note: You can not perform more than
one exercise simultaneously. If an
exercise is active, the QUICK START
and EXERCISE keys will display the
values of the current exercise. To
on
perform another exercise press STOP,
then RESUME and then select the
new exercise.
MANUAL MODE
Click on EXERCISE on the main
screen (Fig.4) and you will enter the
program selection screen (Fig.7).
Click on MANUAL to select manual
program.
Click on the icon
corner to start the exercise.
This program maintains a flat profile that
the user can modify during the exercise.
User can vary at any time of the
program, the speed, by pressing the
SPEED (↨) keys and the incline, by
pressing the INCLINE (↨) keys of the
monitor.
Note: The marked target will be the
last one that has been set.
Programming a time limit.-
a
After selecting manual mode you can
program a time limit for the exercise
(between 5-99 minutes) by touching
directly the bar on the screen.
Select the time and click on the icon
to begin the exercise. The time
will begin to count down until it
reaches zero.
Programming a distance limit.-
If, after selecting manual mode, you
click on the icon
distance for your exercise (between
5–99 km) by touching directly the bar
13
in the lower right
> you can program a