Publicidad
INTRODUCTION
CF 400 CL robotic pool cleaner is a new and efficient robotic pool cleaning equipment.
It can automatically clean the swimming pool without discharge of the pool water.
At the same time, through the filtration system, it collects the suspended solids and
sediments in the water. The main machine body is powered by 25.2V/6.4AH lithium ion
battery pack, so it has high safety.
Before using this product, please read the user manual carefully so that you can use
this machine correctly.
IMPORTANT PRECAUTIONS
• Requirements for machine position during charging: See Article 4 of «Safety
Instructions» on page 1.
• Please do not use other chargers to charge this machine, please do not use this
charger to charge other equipment!
• Make sure that the switch is placed in the OFF position before charging the machine.
• Do not turn on the machine for cleaning when charging!
• The cleaning machine shall carry out cleaning under 10°C-35°C environment!
• Charge the machine before the battery is completely exhausted. When the yellow light
of the machine is on, please charge the machine in time.
• Do not charge the machine when the battery is full. Overcharging will reduce the life of
the battery.
• The machine should be charged under 5°C-35°C environment. When the battery is
overheated, it shall be cooled before charging.
• If the battery will not be used for a long time (more than 3 months), it shall be charged.
• Make sure the charging port is dry before charging.
DESCRIPTION
USE
28
Publicidad
