Aquagem iSAVER K 1100 Manual De Instalación Y Operación página 11

6. PROTECTION & ERROR CODES
Item Code Description
1 E001 Abnormal input voltage
2 E002 Output over current
3 E101 Heat sink over heat
4 E102 Heat sink sensor error
5 E103 Master driver board error
6 E201 Circuit board error
7 E202 Master board EEPROM reading failure
8 E203 RTC time reading error
9 E204 Keyboard EEPROM reading failure
10 E205 Communication error
11 AL01 Auto speed reduction against high temperature
Note:
1. AL01 is not an error indication: when it appears, the inverter will automatically switch to a lower speed to
self-protect against high internal temperature. When the temperature drops back to 68℃ the inverter will
resume at the preset speed.
2. When causes for E002/E101/E103 lifts, the device will resume working automatically, however when it
appears a fourth time, the device will stop working, to resume operation, unplug the device and plug in &
restart again.
7. EXCLUSIONS
Under no circumstances should the manufacturer be held liable for any consequences resulting from
inappropriate, incorrect installation, or mismatching of the product to pool pumps that are not compatible.
The manufacturer reserves the right to change the specification of the product or its performance or the
contents of the User Guide without notice in case of technical upgrade.
8. DISPOSAL
When disposing the product, please hand it over to a designated collection point for the
recycling of waste electrical and electronic equipment.
The separate collection and recycling of waste equipment at the time of disposal will help
ensure that it is recycled in a manner that protects human health and the environment.
Contact your local authority for information on where you can drop off your water for
recycling.
10
Analysis
Not faulty
Not faulty
Contact your supplier
Contact your supplier
Contact your supplier
Contact your supplier
Contact your supplier
Contact your supplier
Contact your supplier
Contact your supplier
Contact your supplier