Aquagem iSAVER K 1100 Manual De Instalación Y Operación página 8

Do not touch the heat sink while the device is in operation or until at least 30 mins after it has been
switched off. Keep it out of reach of children.
Because of high voltage conversion components contained in the device, do not try to disassemble or
replace any components in case of malfunction or breakdown. Before serving on the unit, wait till the
power light turned off or at least 3 minutes after power plug has been
plugged off from input supply.
For iSAVER K 1100C, please connect the pump motor with delta connection.
5. SETTINGS & OPERATION
5.1 Control panel
Power Consumption
Speed in rpm
Night/Day/ Backwash
(Low/Med/High speed)
Lock/Mode
On/Off
5.2 Mode selection
The frequency inverter has 3 modes (speed ranges). You can either run your pump at a constant speed
choosing from "M" or set up to 4 timers for daily operation, each with an individual speed.
Mode
Night (Low)
Day (Medium)
Backwash (High)
Speed range
1200~1650 rpm
1700~2400 rpm
2450~2900 rpm
7
Current time
Timer on/Timer off
Timer
Increase/Decrease
Default speed
1400 rpm
2000 rpm
2900 rpm