Billy Goat Outback BCT4322BCE Manual De Uso página 70

Changing the travel direction forwards / reverse is only possible after stopping the mower!
(13) MOWING DECK ELEVATION ADJUSTMENT LEVER
The lever serves to set the elevation height of the mowing deck from the ground.
When travelling without mowing, the lever must be set to position 7.
(14) REAR HITCH
Enables a standard trailer or other accessories to be connected.
(15) BY-PASS LEVER – FREE MOVEMENT OF THE REAR WHEELS
The bypass lever serves to disengage the transmission for the rear wheel drive and is used to push or pull the mower without using
the engine. Depending on the type of transmission used, it is located either behind the rear left wheel or in front of the rear left
wheel. It has the following two positions:
The more the pedal is pushed towards the floor, the faster the mower will be and vice versa.
When the pedal is released it will automatically return to the neutral position and the mower
will stop.
More information
5.5.
The lever has 7 work positions, which correspond to a mowing height of 3 to 8.5 cm.
The higher the number of the lever position, the higher vegetation height remains after
mowing.
Position Rear wheel drive
[0] DISENGAGED
[1] ENGAGED
70
Use
When pushing the mower, the engine is still
When driving, the engine is running