Publicidad
Idiomas disponibles
Idiomas disponibles
GB
MT
all moving parts have come to a complete
stop.
• Remove the attachment tool.
• Always carry the device by the handle.
Cleaning, maintenance
and storage
WARNING! Electric shock! Protect your-
self when performing maintenance or clean-
ing work. Turn off the device. Pull out the mains
plug.
You should have any repair and maintenance
work that is not described in these instructions
carried out by our Service Centre. Only use ori-
ginal replacement parts.
Cleaning
WARNING! Electric shock Never spray
down the device with water.
Troubleshooting
The following table will assist you in fixing faults:
Problem
Machine does not start
Machine works with interruptions
Poor sawing performance
Saw blade quickly becomes
blunt
28
NOTICE! Risk of damage. Chemical sub-
stances may attack the plastic parts of the
machine. Do not use any cleaning agents or
solvents.
• Keep the ventilation slits, motor housing and
Maintenance
The device is maintenance free.
Storage
Always store the device and accessories:
• clean
• dry
• protected against dust
• out of the reach of children
Possible cause
No mains power supply
On/Off switch (3) is broken
Defective motor
Internal loose contact
On/Off switch (3) is broken
Saw blade (17/18) unsuitable
for the workpiece to be pro-
cessed
Saw blade (17/18) blunt
Incorrect sawing speed
Saw blade (17/18) unsuitable
for the workpiece to be pro-
cessed
Too much pressure applied
Sawing speed too high
handles of the machine clean. Use a damp
cloth or brush to do this.
Error correction
Check the socket, mains connec-
tion cable, plug and fuse and
have them repaired by a quali-
fied electrician if necessary.
contact the service centre.
contact the service centre.
contact the service centre.
contact the service centre.
Insert a suitable saw blade
(17/18)
Insert a new saw blade (17/18)
Adjust sawing speed
Insert a suitable saw blade
(17/18)
Reduce the pressure
Reduce the sawing speed
Publicidad
